GOLDEN GAIT MATERIALS
Description
Golden Gait is a family of high-tech shoe compounds designed specifically for the production of shoe soles and injection molding of boots. High-quality raw materials, modern equipment and formulations tested over the years allow Golden Gait to guarantee the high quality of the final product, comparable to imported counterparts.
FOR FOOTWEAR SOLES
Golden Gait — T
Classic shoe
genre
General purpose shoe compounds based on SBS for the production of shoe soles. The series has excellent physical and mechanical properties and high abrasion resistance. The material in its natural color has an opaque glossy surface and is easy to paint, giving the final product a solid appearance. The sole made of Golden Gait-T is non-slip and remains flexible at low temperatures. The materials are highly workable, which makes it easy to produce soles in one or more colors.
Technical Data Sheet
Test procedure
GOST 267-73
GOST 263-75
GOST 23509-79
GOST 422-75
GOST 270-75
GOST 270-75
GOST 270-75
GOST 7912-74
The name of indicators
Relative density
Shore A Hardness
Abrasion resistance
Resistance to repeated bending
Tensile strength
Elongation at break
Melt flow rate
Operating temperature
Value
1,02
30 — 100
225± 10
> 60 000
5 ± 1
680 ± 20
20 ± 5
-50 — 90
The quantity
g / cm³
units
mm³
cycles
MPa
%
g / 10 min
°С
Benefits
Golden Gait — С
DELUXE
quality
Benefits
Special shoe compounds based on transparent rubber grades. Distinctive properties of the brand are low density, full or partial transparency, increased abrasion resistance and a wide range of colors. Light weight and premium appearance make Golden Gait - With an excellent solution for the production of sports and casual shoes, and the increased abrasion resistance is ideal for the production of safety shoes.
Techical Data Sheet
Test procedure
GOST 267-73
GOST 263-75
GOST 23509-79
GOST 422-75
GOST 270-75
GOST 270-75
GOST 270-75
GOST 7912-74
The name of indicators
Relative density
Shore A Hardness
Abrasion resistance
Resistance to repeated bending
Tensile strength
Elongation at break
Melt flow rate
Operating temperature
GG-CD
0,96
30 — 100
155± 10
> 60 000
6 ± 1
700 ± 20
20 ± 5
-50 — 90
The quantity
g / cm³
units
mm³
cycles
MPa
%
g / 10 min
°С
GG-C
0,92
30 — 100
115± 10
> 60 000
6 ± 1
710 ± 20
10 ± 5
-50 — 90
FOR BOOTS AND GALOSHES
Golden Gait — A
Reliability
in any season
Benefits
Injection molding materials based on SEBS for the production of boots and galoshes. The distinctive properties of the A series are high fluidity, matte or translucent surface, and increased abrasion resistance. The materials are available with a density of 1.02 and 1.18.
Technical Data Sheet
Test procedure
GOST 267-73
GOST 263-75
GOST 23509-79
GOST 422-75
GOST 270-75
GOST 270-75
GOST 270-75
GOST 7912-74
The name of indicators
Относительная плотность
Твердость по шкале Shore A
Сопротивление истиранию
Сопротивление многократному изгибу
Условная прочность при растяжении
Относительное удлинение при разрыве
Показатель текучести расплава
Температура эксплуатации
GG-A 100
1,02
30 — 100
110± 10
> 60 000
6,5 ± 1
720 ± 20
40 ± 5
-50 — 90
The quantity
g / cm³
units
mm³
cycles
MPa
%
g / 10 min
°С
GG-A 118
1,18
30 — 100
130± 10
> 60 000
5,5 ± 1
680 ± 20
35 ± 5
-50 — 90
